Getting your Toyota Camry’s tire pressure right isn’t just about passing inspection. It directly affects your fuel economy, tire wear, ride comfort, and most importantly, safety.
In this guide, I’ll cover the recommended tire pressure for every Toyota Camry model year, including all trim levels and the Hybrid variants, pulled directly from official Toyota owner’s manuals.
Quick Reference Chart: Camry Tire Pressure by Generation
| Model Years | Generation | Typical PSI |
|---|---|---|
| 2024–2026 | 9th Gen (Hybrid only) | 35 PSI |
| 2018–2023 | 8th Gen | 35 PSI |
| 2012–2017 | 7th Gen | 33 PSI |
| 2007–2011 | 6th Gen | 30–33 PSI |
| 2002–2006 | 5th Gen | 30–32 PSI |
| 1997–2001 | 4td Gen | 29–32 PSI |
What Is the Recommended Tire Pressure for a Toyota Camry?
For most Toyota Camry models (2018–2026), the recommended tire pressure is 35 PSI for both front and rear tires.
This applies to standard gas models as well as the Camry Hybrid across most trim levels (LE, SE, XLE, XSE, TRD).
However, this number can vary depending on the model year, trim level, and tire size.
Always check the sticker on the driver’s door jamb for the exact specification for your specific vehicle — that label overrides any general recommendation.
Always check tire pressure when the tires are cold (the vehicle has not been driven for at least 3 hours, or driven less than 1 mile at low speed). Hot tires will read 4–6 PSI higher than the actual “cold” pressure.
Toyota Camry Tire Pressure by Model Year
2024–2026 Toyota Camry
The 2024,2025, and 2026 Camry (now exclusively Hybrid) uses a 35 PSI recommendation across all trims and tire sizes.
| Trim | Tire Size | Front PSI | Rear PSI |
|---|---|---|---|
| LE | 205/65R16 | 35 | 35 |
| SE / XSE | 235/45R18 | 35 | 35 |
| XLE | 235/45R18 | 35 | 35 |
Source: 2024 & 2025 Toyota Camry Hybrid Owner’s Manual
2022–2023 Toyota Camry
| Trim | Tire Size | Front PSI | Rear PSI |
|---|---|---|---|
| LE / LE Hybrid | 205/65R16 | 35 | 35 |
| SE / SE Hybrid | 235/45R18 | 35 | 35 |
| XLE / XLE Hybrid | 235/45R18 | 35 | 35 |
| XSE | 235/45R18 | 35 | 35 |
| TRD | 235/45R18 | 35 | 35 |
Source: 2022 & 2023 Toyota Camry Owner’s Manual
2021 Toyota Camry
| Trim | Tire Size | Front PSI | Rear PSI |
|---|---|---|---|
| LE | 205/65R16 | 35 | 35 |
| SE | 235/45R18 | 35 | 35 |
| XLE | 235/45R18 | 35 | 35 |
| XSE | 235/45R18 | 35 | 35 |
| TRD | 235/45R18 | 35 | 35 |
2018–2020 Toyota Camry
The 7th generation Camry (2018–2020) follows the same 35 PSI standard across all trims and both gas and hybrid variants.
| Trim | Tire Size | Front PSI | Rear PSI |
|---|---|---|---|
| LE | 205/65R16 | 35 | 35 |
| SE | 235/45R18 | 35 | 35 |
| XSE | 235/45R18 | 35 | 35 |
| XLE | 235/45R18 | 35 | 35 |
| LE Hybrid | 215/55R17 | 35 | 35 |
| XLE Hybrid | 215/55R17 | 35 | 35 |
Source: 2018, 2019, 2020 Toyota Camry Owner’s Manual
2012–2017 Toyota Camry (6th Generation)
| Trim | Tire Size | Front PSI | Rear PSI |
|---|---|---|---|
| LE | 205/65R16 | 33 | 33 |
| SE | 215/55R17 | 33 | 33 |
| XLE | 215/55R17 | 33 | 33 |
| Hybrid LE / XLE | 215/55R17 | 33 | 33 |
Note: The 6th generation Camry (2012–2017) recommends 33 PSI rather than 35 PSI. This is one of the most common mistakes owners make when looking up tire pressure for an older Camry.
2007–2011 Toyota Camry (5th Generation)
| Trim | Tire Size | Front PSI | Rear PSI |
|---|---|---|---|
| CE / LE | 205/65R15 | 30 | 30 |
| SE | 215/55R16 | 33 | 33 |
| XLE | 215/55R16 | 33 | 33 |
| Hybrid | 215/55R17 | 33 | 33 |
Source: 2007 Toyota Camry Owner’s Manual
Note: The base CE and LE models with 15-inch wheels use 30 PSI, while the SE and XLE with larger 16–17 inch wheels use 33 PSI.
2002–2006 Toyota Camry (4th Generation)
| Trim | Tire Size | Front PSI | Rear PSI |
|---|---|---|---|
| LE | 205/65R15 | 30 | 30 |
| SE | 215/55R16 | 32 | 32 |
| XLE | 215/55R16 | 32 | 32 |
Source: 2002–2006 Toyota Camry Owner’s Manuals
1997–2001 Toyota Camry (3rd Generation)
| Trim | Tire Size | Front PSI | Rear PSI |
|---|---|---|---|
| CE | 195/70R14 | 29 | 29 |
| LE | 205/65R15 | 30 | 30 |
| XLE | 215/55R16 | 32 | 32 |
| V6 models | 215/55R16 | 32 | 32 |
Where to Find Tire Pressure Information on Your Camry
You don’t have to memorize the numbers above. Toyota puts the exact tire pressure recommendation directly on your vehicle in two places:
1. Driver’s Door Jamb Sticker: Open the driver’s side door and look at the door frame (jamb). There will be a white or yellow sticker listing the recommended tire size and inflation pressure for your specific vehicle. This is the most reliable source — always use this number over any generic chart.
2. Owner’s Manual: Your owner’s manual (Section 8: Vehicle Specifications in modern Camrys) has a full tire inflation pressure chart. If you have a 2018 or newer Camry, it’s in the “Maintenance Data” section.
3. Fuel Filler Door (some models) A few Camry trim years also include a small tire pressure sticker inside the fuel filler door.
What Happens If Your Tire Pressure Is Wrong?
If Tires Are Under-Inflated (Too Low)
- Increased rolling resistance → worse fuel economy (up to 3% more fuel used)
- Tires overheat more easily → higher risk of blowout
- Outer and inner edges wear faster → uneven tread wear
- Poor handling and longer stopping distances
- TPMS warning light activates (typically at 25% below recommended)
If Tires Are Over-Inflated (Too High)
- Only the center of the tire contacts the road → uneven center wear
- Harsher ride quality — you’ll feel every bump
- Reduced traction and grip, especially in wet conditions
- Slightly better fuel economy, but at the cost of safety and tire longevity
Toyota Camry TPMS (Tire Pressure Monitoring System)
All Toyota Camry models from 2008 onward are equipped with a Tire Pressure Monitoring System (TPMS). This system uses sensors inside each wheel to monitor tire pressure in real time.
When does the TPMS light come on?
The TPMS warning light (shaped like a flat-tire cross-section with an exclamation mark) will illuminate when one or more tires drop by 25% or more below the recommended pressure. For a Camry set at 35 PSI, the light typically activates around 26 PSI.
Important: The TPMS light coming on doesn’t always mean you have a flat tire. It may simply mean your tires are slightly underinflated — especially common in cold weather when air contracts.
How to Reset the TPMS After Inflating Tires (2018–2025 Camry)
- Inflate all four tires to the correct pressure
- Drive at speeds above 25 mph for about 10 minutes
- The system will automatically recalibrate, and the warning light will turn off
On older 6th- and 7th-Gen Camrys, if you can’t find the TPMS reset button on the dash, look lower—it’s often hidden inside the glove box on the left-hand side, or right under the steering column steering wheel plastic.
How Temperature Affects Camry Tire Pressure
Tire pressure changes with temperature — approximately 1 PSI for every 10°F (5.5°C) change in ambient temperature.
Practical Example: If you set your tires to 35 PSI on a 70°F (21°C) day and the temperature drops to 30°F (-1°C) overnight, your tires will read approximately 31 PSI the next morning — even though no air has escaped. This is completely normal.
Seasonal Tips:
- Winter: Check tire pressure more frequently. Cold weather naturally causes PSI to drop.
- Summer: Tires may read 2–4 PSI higher on a hot day — this is normal expansion and does not mean you need to let air out.
- Best time to check: First thing in the morning before driving, or after the car has been parked for at least 3 hours.
How to Check and Inflate Toyota Camry Tires
What you’ll need:
- A quality tire pressure gauge (digital or stick-type)
- Access to an air compressor or a gas station air pump
Step-by-step:
- Park on level ground and ensure the tires are cold (not recently driven)
- Remove the valve cap from the tire’s valve stem (the small rubber or metal protrusion on the wheel)
- Press the gauge firmly onto the valve stem — you’ll hear a brief hiss, then get a reading
- Compare to the recommended PSI (found on your door jamb sticker)
- Add air if needed — press the air hose onto the valve stem and add air in short bursts, checking the pressure between each burst
- Release air if over-inflated — press the small pin in the center of the valve stem using the back of a pen cap or the release tip on your gauge
- Replace the valve cap after checking each tire
Repeat for all four tires, and don’t forget the spare if your Camry has a full-size spare.
Does the Spare Tire Have a Different Pressure?
Yes. The spare tire on Toyota Camry models has a different pressure requirement:
- Full-size spare: Same as the other tires — 35 PSI (or match the door jamb spec for your model year)
- Compact spare (“donut”): 60 PSI — this is much higher than the regular tires and is normal for a compact spare
If your Camry came with a compact spare tire, check it regularly and never drive it faster than 50 mph or more than 50 miles before replacing it with a proper tire.
FAQs
Final Thoughts
Keeping your Toyota Camry at the correct tire pressure is one of the simplest maintenance tasks you can do, yet it has a significant impact on safety, fuel economy, and tire longevity. For most modern Camrys (2018 and newer), that number is 35 PSI cold for all four tires.
Always verify against the sticker on your driver’s door jamb, as it accounts for your vehicle’s specific trim level and tire size. Set a monthly reminder to check — it takes less than 5 minutes and can save you money on gas and tires over the long run.
If you have any further questions, feel free to leave them in the comments section!